Helonic
Drawing Review

What Sheet Coordinates Should an AI Review Finding Show?

Published November 7, 2026•3 min read

Helonic is an AI construction drawing analysis platform for VDC and preconstruction teams testing whether AI drawing review findings carry usable sheet coordinates. A sheet coordinate on an AI drawing review finding is the point or box on the PDF where the issue sits, and it has to be right every time. If a finding says Sheet M-201 but opens to the wrong corner, a reviewer is back to searching the sheet by eye.

Direct answer. Every Helonic or other AI drawing review finding should carry a printed sheet number and a page coordinate that opens to the same spot on the PDF, on rotated and oversize sheets, after a revision, and in the export. Test those four cases on your own set before buying.

What are the four tests?

TestPass looks likeFailure looks like
Open ten findingsEach lands inside or on the boxed areaLanding in a nearby corner or on a title block
Rotated or oversize sheetThe box still sits on the issueThe box is offset or rotated wrong
After a revision uploadFindings follow the new sheet, or are flagged as staleOld coordinates on a changed sheet
In the exported listExport location matches the viewerExport says one place, viewer shows another

Run them in the pilot on your own set, not a vendor sample, per why an AI drawing review demo should run on your own set.

Why do coordinates fail on real drawings?

  • PDF pages with a rotation flag the tool ignores.
  • Sheets exported at unusual page sizes, such as architectural E-size.
  • Scanned or flattened drawings where text has to be read by OCR.
  • Pages cropped or reordered between the original and the upload.

These are ordinary on a bid set. A coordinate system that only works on a clean test PDF has an accuracy problem you can't see in a demo.

What should the coordinate carry besides the point?

The printed sheet number and the PDF page number, because they differ. A finding should say A-201 and page 14, so a person with the printed set and a person with the PDF both land on it.

It should also name the other side of the conflict, such as the schedule row or detail, so the reviewer can open both. How location speeds the check is in why an AI review should show each comment on the sheet.

How do you score it?

Count findings that open correctly out of 20 sampled, and note the sheet types that failed. A miss on rotated sheets is a different problem from a miss on scans, and the vendor should know which one it is.

Put the number on the pilot sheet with the other measures, and treat an offset coordinate as a failed finding, because the reviewer's time is what the location was meant to save.

How does Helonic show location?

Each Helonic finding carries the page coordinates of the cited location, and opens boxed on the sheet in the viewer. Test it on a rotated sheet and a revision from your own project, and check the coordinates survive into the export described in what an AI drawing review findings export must include. The behavior after a revision can be compared with revision comparison.

Practitioner insight

“The demo set was perfect. Our hospital set had rotated sheets and half the boxes sat in the wrong corner. Try your ugliest sheets first.”

Conversations with VDC managers who tested finding locations on rotated and oversize sheets during AI drawing review trials.

Frequently Asked Questions

What coordinates should an AI drawing review finding show?
A printed sheet number, the PDF page number, and a point or box that opens to the same spot on the sheet, including in the export.
How do I test finding locations?
Open ten findings, then test a rotated or oversize sheet, a revision upload, and the exported list. All four should land on the same spot.
Why do coordinates fail on real sets?
Rotated pages, unusual page sizes, scanned drawings, and cropped or reordered pages are common on bid sets and often missing from demo files.
Does Helonic give a location for each finding?
Yes. Each finding has the page coordinates of the cited location and opens boxed on the sheet. Test it on your own rotated sheets and revisions.
MG

Manas Gandhi

Co-founder & CTO, Helonic

Manas is the co-founder and CTO of Helonic, where he leads engineering and AI research for construction drawing analysis. He works directly with structural, MEP, civil, and fire protection engineers to translate the way they review drawings into AI systems that flag the issues that actually matter in the field. Before Helonic, he built machine learning pipelines for technical document understanding and has spent the last several years interviewing licensed design engineers and discipline leads to ground product decisions in real practice rather than industry assumptions.

Areas of focus
  • AI for technical document understanding
  • Cross-discipline coordination workflows
  • Code compliance automation (IBC, NEC, NFPA, IPC, IMC, ASCE)
  • Structural and MEP drawing review systems

Last reviewed by Manas Gandhi · November 2026

Related Reading