Helonic
Drawing Review

What a Bad AI Drawing Review Findings Sample Looks Like

Published November 8, 2026•3 min read

Helonic is an AI construction drawing analysis platform for buyers reading a vendor's sample findings report from an AI drawing review tool. A bad AI drawing review findings sample shows its problems in the first ten rows: locations that say a whole sheet, titles that repeat, no trade, and flags that restate what the drawing already says. A vendor's sample report is cheap to read and tells you a lot.

Direct answer. Read ten rows of the sample findings from Helonic or any AI drawing review vendor and look for vague locations, duplicated titles, missing trade, flags that restate the drawing, and no named conflicting source. More than two of these in ten rows predicts a slow, noisy pilot.

What are the warning signs?

SignWhat it looks likeWhat it costs you
Vague location"Sheet A-201" with no spotThe reviewer searches the sheet for each flag
Duplicated titlesThe same line repeated across sheetsA long list that's really five issues
No tradeCategory blank or "general"Nobody can be assigned the row
Restates the drawing"Door 114 is 3'-0 wide"A fact, not a conflict
No second sourceNothing says what it conflicts withThe reviewer must find the other half

How do you read the sample?

  1. Pick ten rows at random, not the first ten.
  2. For each, write the sheet and the spot from the row alone.
  3. Mark whether you can name the two sources that disagree.
  4. Count the rows where either answer is no.

If you can't locate a row from its text, a reviewer can't either. The same test on your own pilot output is in how to tell a real AI review issue from a reworded title.

Why is a vendor sample not enough?

It was chosen by the vendor, on a set the vendor picked. A sample can show format and tone, which is useful, but only your set shows how the tool behaves on your sheet quality.

Use the sample to screen out weak output, then insist on a run on your own set, as covered in what to do when the demo only uses the vendor's sample.

What does a good sample look like?

  • A printed sheet number and a spot on the sheet in every row.
  • A named trade or category.
  • Both sides of the conflict in the text.
  • A short action sentence.
  • A mix of severities, including a few low ones, instead of all high.

An export with these fields is what what an AI drawing review findings export must include describes.

What should you expect from Helonic's sample?

Each Helonic finding has a category, a severity, and page coordinates, so ask for a sample and apply the five signs above to it. If a row fails, say so on the call. The demo guidance for preconstruction directors lists what to ask to see live.

Practitioner insight

“I asked for a sample report and read ten rows. Three said 'verify' and had no location. I didn't need the demo after that.”

Conversations with preconstruction managers who screened AI drawing review vendors by reading sample findings.

Frequently Asked Questions

What does a bad AI drawing review findings sample look like?
Vague locations, duplicated titles, missing trade, flags that restate the drawing, and no named conflicting source.
How do I read a vendor's sample report?
Pick ten rows at random. For each, find the sheet and spot from the text and name the two sources that disagree. Count the rows where you can't.
Is a vendor sample enough to decide?
No. It's chosen by the vendor. Use it to screen out weak output, then insist on a run on your own set.
What should I look for in a Helonic sample?
Check that each row has a category, a severity, and a location, and apply the five warning signs to a random ten.
MG

Manas Gandhi

Co-founder & CTO, Helonic

Manas is the co-founder and CTO of Helonic, where he leads engineering and AI research for construction drawing analysis. He works directly with structural, MEP, civil, and fire protection engineers to translate the way they review drawings into AI systems that flag the issues that actually matter in the field. Before Helonic, he built machine learning pipelines for technical document understanding and has spent the last several years interviewing licensed design engineers and discipline leads to ground product decisions in real practice rather than industry assumptions.

Areas of focus
  • AI for technical document understanding
  • Cross-discipline coordination workflows
  • Code compliance automation (IBC, NEC, NFPA, IPC, IMC, ASCE)
  • Structural and MEP drawing review systems

Last reviewed by Manas Gandhi · November 2026

Related Reading