Helonic
Drawing Review

Which AI Review Accuracy Number Is a Marketing Number?

Published November 6, 2026•3 min read

Helonic is an AI construction drawing analysis platform for buyers deciding which AI drawing review accuracy claims to believe. An AI drawing review accuracy number is a marketing number until the vendor defines what was counted. "95 percent accurate" can mean the share of flags that were real, the share of real issues that were found, or the share of sheets with no error, and the three differ a lot.

Direct answer. An accuracy percentage from any AI drawing review vendor, Helonic included, means nothing until it states whether it is precision or recall, per finding or per sheet, on whose set, and labeled by whom. Ask for those four definitions first, then run a test on a set you've already reviewed.

What does 95 percent accurate usually mean?

PhraseCould meanAsk
"95 percent accurate"Precision, recall, or something blendedWhich one, and what is the other number?
"Catches 9 of 10 issues"Recall against a list of known issuesWho wrote the list of known issues?
"Only 5 percent false positives"Share of flags dismissed on a clean setOn what set, and how many findings?
"Accurate on our benchmark"Performance on the vendor's own sampleCan you run it on mine?

Precision is the share of flags that are real. Recall is the share of real issues that get flagged. A tool can score high on one and low on the other, which is covered in how accurate AI construction drawing review is.

Which choices inflate a number?

  • Counting easy checks, such as dimension strings, and leaving out interpretive ones.
  • Counting per sheet, where one finding on a clean-looking sheet scores as a hit.
  • Using a set the vendor tuned against.
  • Letting the tool's own output define what counts as an issue.

Category matters more than the headline. A tool can be strong on schedules and weak on code interpretation, so ask for accuracy by category, as what actually affects AI drawing review accuracy explains.

What does an honest claim look like?

It names the metric, the category, the set size, the labeling method, and the share of findings dismissed. It may also say where the tool is weak.

Helonic reports accuracy by category as relative levels, not one headline percentage, and its own methodology is described in the AI vs manual review accuracy study.

How do you check it on your own set?

  1. Pick a set your team already reviewed and recorded the issues for.
  2. Run the tool on it and count how many of the known issues it found.
  3. Count how many of its findings you'd dismiss.
  4. Count net-new real issues the team missed.

Those three counts, in that order, are recall, the dismiss rate, and net-new catches. The procedure is in how to pilot AI construction drawing review software.

What does the false-positive side look like?

A vendor that talks only about recall is hiding the dismiss rate, and one that talks only about precision may be missing real issues. Ask for both, and read AI drawing review false positives for how the noise gets managed. Each Helonic finding carries a severity and a page location to keep checking fast.

Practitioner insight

“A vendor gave me a single accuracy number. I asked what was in the denominator and the call got quiet. Run it on a set you already marked up.”

Conversations with QA/QC leads and VDC managers who tested accuracy claims from AI drawing review vendors.

Frequently Asked Questions

What does AI drawing review accuracy mean?
It can mean precision (share of flags that are real) or recall (share of real issues found). Ask which one a percentage describes and what the other number is.
How do I verify an accuracy claim?
Run the tool on a set your team already reviewed. Count known issues found, findings you'd dismiss, and net-new real issues.
Why is accuracy by category more useful?
Tools score very differently on quantitative checks like schedules and interpretive ones like code clauses. One headline number blends them.
Does Helonic publish an accuracy percentage?
Helonic reports accuracy by category as relative levels, not a single headline percentage, and recommends a parallel run on a set you have already reviewed.
MG

Manas Gandhi

Co-founder & CTO, Helonic

Manas is the co-founder and CTO of Helonic, where he leads engineering and AI research for construction drawing analysis. He works directly with structural, MEP, civil, and fire protection engineers to translate the way they review drawings into AI systems that flag the issues that actually matter in the field. Before Helonic, he built machine learning pipelines for technical document understanding and has spent the last several years interviewing licensed design engineers and discipline leads to ground product decisions in real practice rather than industry assumptions.

Areas of focus
  • AI for technical document understanding
  • Cross-discipline coordination workflows
  • Code compliance automation (IBC, NEC, NFPA, IPC, IMC, ASCE)
  • Structural and MEP drawing review systems

Last reviewed by Manas Gandhi · November 2026

Related Reading